Home > Senza categoria > Product industrialisation: from prototype to mass production

Product industrialisation: from prototype to mass production

What product industrialisation is and how to move from prototype to mass production: DFM, DFA, injection moulding and regulations.

Adòpro coffee machine

A prototype that works is not yet a product. Product industrialisation is the work that turns a design into an object that can be mass-produced, with costs, timing and quality under control.

It is the stage where many good ideas stall: shapes impossible to mould, too many components, the wrong materials for the chosen process. Tackling it early, together with the designer and the manufacturer, avoids redoing the design when the moulds are already being built.

What industrialisation is

Industrialising means adapting the design to the real production process: choosing materials and technologies, simplifying components, defining tolerances and finishes, preparing technical drawings for suppliers and checking everything with a pilot run. It comes after the concept and detailed design and before market launch.

The main stages

Every product has its own path, but three steps almost always come back.

01

DFM and DFA review

The design is reviewed through the eyes of production and assembly: components, geometry, materials.

02

Process, suppliers, tooling

You choose how to make each part and with whom, and design moulds and tooling.

03

Pilot run and validation

The first parts from the mould are measured, assembled and tested before starting the series.

Designing for production: DFM and DFA

DFM (Design for Manufacturing) and DFA (Design for Assembly) are methods for designing parts that are easy to make and assemble. The DFA method developed by Geoffrey Boothroyd and Peter Dewhurst starts from the theoretical minimum number of components: for each part you ask whether it moves relative to the others, whether it must be a different material, and whether it must remain separate for assembly or maintenance. If the answer is always no, that part can be eliminated or merged with another. Fewer components means fewer moulds, fewer assembly operations and fewer points where something can go wrong.

An example: injection moulding

For injection-moulded plastic parts, some design rules weigh heavily on cost and quality:

  • Uniform wall thickness: very different walls cool differently and the part warps or shows sink marks. According to Protolabs’ guidelines, a thinner wall should not go below 40–60% of the thickness of the adjacent wall.
  • Draft angles: walls must be slightly tapered to release the part from the mould; textured surfaces need larger angles than polished ones.
  • Ribs: they stiffen without thickening the walls, as long as they stay thinner than the wall they sit on.
  • Undercuts: they require slides or moving parts in the mould and increase its cost; they can often be avoided by rethinking the geometry.
These are choices made during design, not afterwards: that is why the designer and the mould maker should talk before freezing the 3D model.

Regulations and documentation

Industrialising also means preparing the product for the market. In the European Union, for non-food consumer products, Regulation (EU) 2023/988 on general product safety (GPSR) has applied since 13 December 2024; among the manufacturer’s obligations it requires an internal risk analysis and technical documentation. Many categories also have specific standards: for toys, for example, we covered them in our article on the EN 71 standards.

When to involve the designer

As early as possible. A design conceived from the start for the production process reaches mass production with fewer revisions, simpler moulds and more predictable costs. In our product design work we follow the project from concept to production files, and we use renders to check shapes and finishes before investing in moulds.

Let’s talk about your product →

Sources

Accessed on 22 October 2026:

Shall we design your next product?

A quote, a question or just a hello: we’re always happy to hear from you.